|
Current Version - FieldGenius 2005 Version 1.2 (May 16, 2005) Information about FieldGenius 2005 Version 1.2 Read about it here Information about FieldGenius 2005 Version 1.1 Read about it here Information about FieldGenius 2005 Version 1.0 Read about it here |
Step 1: Install FieldGenius Activesync Support Module.
This small installation will add a module to Microsoft Activesync that allows it to easily communicate with the FieldGenius on your Windows CE device. This installation is in the form of a simple integrated installation.
Install Activesync Support Module
Step 2: Install FieldGenius.
>There are two basic types of installations of FieldGenius depending upon the operating system in your device.
- Windows 3.0 device or a Pocket PC device: you can use a special "one-click" install. The one-click install will download and install the software onto your device in one pass. When you select a link below, it will start the one-click install.
- Windows CE.NET device: you need to download a zip file containing a "CAB" file (or cabinet file). You need to unzip the CAB file and copy it to your Windows CE device. Then double tap the CAB file on your device to start the installation. The CAB files we create are designed to automatically install into the correct location on your device. For example, on a RECON it will install to "Built-in Storage". On a Ranger.net device it will install to "Disk". On the Tracker it will install to "SystemCF".
| Product: | Notes: | ||||||||
|
|
MicroSurvey Tracker The Tracker is a Windows CE.NET device. Single EXE Download: (Membrane Edition "Standard Keypad") Download a single EXE file and run it on your desktop machine. |
||||||||
|
|
The installation is in two parts. The Basic/Pro/Robotics module must be installed. The GPS Module files are only necessary if you want the Datums & Coordinate systems installed. |
||||||||
|
|
|||||||||
|
|
FieldGenius for Pocket PC 2000-2003 The PocketPC installation is very popular, so we are also providing the installation as a single EXE file that you can download and run. |
||||||||
|
|
Important Note: Older Panasonics running Windows CE 3.0 (start button at bottom) must have ROM version V1.00L21E installed to run FG2004. Check the ROM version under Start -> Settings -> Control Panel -> System -> Settings -> Version The Toughbook installation is very popular, so we are also providing the installation as a single EXE file that you can download and run. Download it here. - old style with Windows CE and start button at the bottom of the screen. Download it here. - new style with Pocket PC and start button at the top of the screen. |
||||||||
|
|
The installation is in three parts. The main program files must be installed followed by the exe file. The GPS Module files are only necessary if you want the Datums & Coordinate systems installed. Step 1: Install the Basic/Pro/Robotics module Step 2: Download the following Zip File. DAP Executable Unzip on your computer and copy the FG2005DAP.exe file to the following location in your DAP: Storage_nand\MicroSurvey FieldGenius\programs. Step 3 (Optional): Install the optional GPS Files |
||||||||
|
|
The Symbol 8100 runs the Pocket PC install. |
||||||||
|
|
The installation is in two parts. The Basic/Pro/Robotics module must be installed. The GPS Module files are only necessary if you want the Datums & Coordinate systems installed.
|
||||||||
|
|
The Recon is now available with the Pocket PC Operating System and there are many Recons that were sold with the Windows CE.NET Operating System. (Note: Compact Flash Storage Card required for install) |
||||||||
|
|
The installation is in two parts. The Basic/Pro/Robotics module must be installed. The GPS Module files are only necessary if you want the Datums & Coordinate systems installed. Note: the installer for the FC1000 is a bit unreliable. We use the Installshield installation system, and they do not seem to support this unit very well. After installing the GPS files, please check to make sure that they were installed in a Mapping directory below the FieldGenius Programs directory. To clarify, the path to the GPS files on the FC1000 must be: \Storage Card\MicroSurvey FieldGenius\Programs\Mapping We have seen the installer create a directory on the root of the Storage Card called "MicroSurvey FieldGenius GPS Files". If this happens, please create a Mapping directory and move the files into it. Please call MicroSurvey if you have any questions. |
||||||||
|
FieldGenius 2005 Emulator / Desktop /Tablet PC Version Of course you can use it for training on your desktop. Supports both Landscape (Ranger, Tracker, Allegro) and Portrait displays (Pocket PC, Toughbook, Recon) |
|||||||||
|
Datum Grid Editor - 110 Megabytes (now you know why you got that high speed connection! This program is used to create a subset of the Geodetic Data files. These files are very large, so we created this utility to extract a subset. This subset is then copied onto your Data Collector in the following directory: MicroSurvey FieldGenius\Programs\Mapping |
|||||||||
Jason Poitras
Comments