How to Create a GPS Network Rover Profile Using South FieldGenius and a South S82 GNSS Receiver

This guide describes how to create a GPS GSM network profile using a South S82-V GNSS receiver, a Getac PS236 data collector, and South FieldGenius 2012.

Note: This guide also applies to the South S82-T and South S86-T GNSS receivers.

In this guide you will learn how to connect the South S82-V, via Bluetooth, to the Getac PS236.

You will then learn how connect to a GPS network data correction service (such as NTRIP), and begin measuring using this GPS network data stream.

Click here to download this guide.

Note: If you right-click on the above link and select either "Save Link As" or "Save Target as", you will be able to save this guide to your computer's hard drive.