When FieldGenius is installed onboard a Leica Total Station, such as TS16 / TS60 / MS60, you may come across the following error message: Invalid communication settings for instrument. Port may alread...
The following was successful using GS14 Firmware 6.0.0. Later versions of the Firmware (Firmware 6.16) have been tested and WILL NOT WORK. Firmware 6.0.0. is currently the only known supported firmwar...
This document details the steps to connect and configure FieldGenius to the Sokkia iX series robotic total station. This document is specific to the iX series and FieldGenius version 9.3.24.0. For mor...
This document details the steps to connect and configure FieldGenius to connect to the Sokkia GCX3 GNSS receiver. The document is specific to the GCX3 and FieldGenius version 9.3.24.0. Select the lin...
This document details the steps to connect and configure FieldGenius to connect to the Sokkia GRX2 GNSS receiver with a GSM modem. For information on how to configure the UHF radio, refer to the Field...
Why do you need to pair the RC-PR remote to a Total Station? Users will be required to pair the RC-PR remote to the Sokkia IX, SX, and SRX total stations if they have previously performed a reset on t...
Activating the GS14 CDMA module so it will work with EVR: To activate the CDMA module in the GS14 so that you can use it as a Network Rover on the Verizon network, you require: A CS20 controller that ...
Why reset the Sokkia RC-PR Remote? In the event the the Sokkia RC-PR remote will not pair with a total station or Bluetooth communication is problematic, resetting the RC-PR initializes the Bluetooth ...
Select the link below to download the configuration guide for FieldGenius 9.3.23.0 or Evidence Reocrder 11.1.23.0 or newer....
Over the years we have noted which communication parameters allow customers to connect with their Nikon or Sokkia Instruments in FieldGenius or Evidence Recorder when they are using a serial cable. W...